Home
                     

Home

Company Profile services Infrastructure Experience Enquiry Enquiry Online Resume Submission

  LIST OF TESTING INSTRUMENTS  (Contd.)         


Back 


SR. 

NO. 

  DESCRIPTION

QUANTITY 

14.0  Accessories :

  The following testing accessories are used along with the major testing equipments.

   14.1   2500V/5000V Motorised Megger : These meggers are used for measurement of polarization
                                                              index and I.R.value of H.T equipment.

   14.2   D.C.Source Box : This source output is ripple free, non-distorted 0-230 Volts and 2 Amp/10 Amp.

   14.3   Polarity Test Box : Specifically designed for checking polarity of current and potential
                                        transformers.

   14.4   Clip on Ammeter :

             This instrument has following ranges,
                a)   Current range from 15A to 600A.
                b)   Voltage range from 0-600V.
                c)   Resistance range.

   14.5   Clam on type Leakage Current Meter :This is a sensitive meter capable of measuring currents
                                                                    as low as 2mA.

   14.6   Three Phase Variac :This instrument provides a three phase continuously variable voltage
                                           supply from 0-470V, 10 Amp.

   14.7   AVO meters of high accuracy and of reputed make.

   14.8   Hand Driven Megger of 500V and 1000V.

   14.9   Digital A.C. & D.C. Voltmeters and Ammeters of precision class.

  14.10   Precision Class laboratory type, AC Ammeters.

  14.11   Multimeters of Fluke make of very high accuracy.

  14.12   Digital phase angle meter for measurement of phase 

             angles from (+ 0o to + 180o).

5 Sets.

     
15.0  Earth Testing Megger : 

 Three point method earth resistance testing kit.

 
     
16.0  Phasing Rod : 

 A set of live phasing rod to identify the phasing out between the two supplies. The range of phasing rod
 is from 2KV to 33KV.

1 Set.
     
17.0  Power Quality Analyser :

 This measuring equipment designed and manufactured by "FLUKE" measures :

   17.1   Volts / Amps / Hertz

   17.2   Power : KW, KVA, KVAR
   17.3
   Harmonics for Voltage, Amps, Watts
   17.4   Sags, Swells recording of Voltage and Current
   17.5
   Transients.
   17.6
   Inrush measurement

   Meter can record above data for a set period.   Above measurements are supported by relevant
   softwares.

1 No.
     
18.0  Energy Standards - Meter Testing System :
 This measuring instrument is designed and manufactured by " EDI ". These metering system is 
 supported by relevant software and it measures  :

   18.1   3 Phase current, voltage, power factor and frequency
   18.2   3 Phase KW, KVAR & KVA and single phase KW, KVAR & KVA
   18.3   Energy : 3 Phase KWh, KVARh & KVAh
   18.4   Recording of KWh Energy for a period
1 No.
     
   CALIBRATION :  The electrical measuring instruments used by Power - Linker Group 
                                 of Co's are calibrated with reference standards traceable to NPL,
                                 Delhi, through Electronics Regional Testing Laboratory, STQC, 
                                 Department of Electronics.
 
 

Click here to download this page

TOP
_______________________________________________________________________________________________________________

                                                                                                                                                                      Update : 13.01.06